Below is a list of our most popular Tesun Game Controller product support software drivers. To download, select the Model Name/Number of your device, then.

Why Would I Need to Do This? Although many gamepads, like the Xbox One or Xbox 360 controllers, are usually calibrated for gaming on a PC right out of the box, others may need you to calibrate them before the system recognizes all their movements with complete accuracy. For example, if you use a Nintendo 64 controller with a USB adapter, it will almost certainly need to be calibrated before you can use it. In other cases, you may just have an old controller that needs a little help. For example, maybe you have a button that’s sticking and you aren’t sure just how much the computer is able to read from it on each press. Or perhaps your gamepad has a worn down thumbstick that doesn’t seem like it’s tilting as far as it could. The calibration tool can help you dial in your controller so it’s as accurate as it can be. Download serial number syswin 34.

We’ll be using an Xbox 360 controller for this guide, since that’s what we have, but it should work pretty much the same for any gamepad you plug in. Open the Calibration Tool To find the Calibration Tool, begin by going down to your Start Menu, and selecting “Settings”. Once in Settings, click on the tab for “Devices”. After the next window, scroll down to the link that reads “Devices and Printers” inside the “Printers and Scanners” tab, and click on it. (You can also get here by going into Control Panel > Devices and Printers in all versions of Windows). RELATED: From here, the controller should pop up as long as it’s already connected.

If not, make sure you have all the latest drivers installed for the controller of your choosing. Find the controller, and right click it to bring up the following drop-down menu. From here, click on the option for “Game controller settings”. After you click this, the following window should automatically pop up. From there, click on the “Properties” button. The window that follows will contain two options: “Settings” and “Test”.

To start, choose the Settings tab, and then click the button in this window that reads “Calibrate”. From here, the Calibration Wizard will automatically begin taking you through the process to get your controller set up properly. (This window is also where you’ll find the button to “Reset to Default”, in case you want the tool to automatically reset any changes that were made during a previous calibration run.) Calibrate Your Controller Again, we’re using the Xbox 360 controller here, so you may see slightly different windows depending on your controller, but most of it should be very similar. Click Next to start the calibration. The calibration tool will start off with the “D-Pad” calibration, which on the Xbox 360 controller is actually the left thumbstick. At first, it will ask you to leave the thumbstick alone so it can find the center point.

Let go of the thumbstick and click “Next”, at which point you’ll be taken to the next screen. Although it’s not necessary, we recommend selecting the “Display Raw Data” box, which will show you exactly where the resting point for the thumbstick is with quantifiable numbers. This data is valuable because it will tell you if either of your thumbsticks are starting to wear down due to overuse, and can help you to diagnose any reasons why your in-game accuracy might be slipping. From here, swing the left thumbstick all the way around its full range of motion a few times.